3 oz Shot Pitcher Glass
3 oz Shot Pitcher Glass
Barista Tools

RATTLEWARE 3 oz SHOT PITCHER GLASS

RM60.00

(Shot Glasses)

This pitcher has everything you need with a handle and two pour spouts. Great for pulling double shots. Hold the handle of the shot pitcher to avoid getting burns on your fingers. Graduated marks read in ounces and milliliters for all your measuring needs.

Ounces are marked at every 1/2 ounce

Milliliters are marked at every 10ml

Join Waitlist We will inform you when the product arrives in stock. Please leave your valid email address below.
You need to Login for joining waitlist.
Login Register
SKU: bt00001 Category: Tags: , , , ,

Additional information

Weight N/A
Sizes

3 oz
Next ProductLARGE COUNTER BRUSH 13.5"

Related Products

  • ES LOGO 2 oz SHOT GLASS

    (Shot Glass)

    This hardy 2 ounce shot glass is less likely to break or chip due to the heavier weight glass. It also provides more insulation against heat for sensitive fingers.

    • Graduated marks read in ounces and milliliters for all your measuring needs.
    • Ounces are marked at every 1/2 ounce
    • Milliliters are marked at every 10 ml
    • Height: 3inches / 8cm
    • Diameter at the top: 2.13 inches / 5cm
    • Espresso Supply Logo on the shot glass
    RM75.00
    Select options This product has multiple variants. The options may be chosen on the product page

  • THERMOMETER-STEAMING, EASY STEM S10 5″

    (Easy Steam Thermometer)

    Simplify steaming with this innovative thermometer. The Original Easy Steam Thermometer features markings at each degree and is excellent for training or daily use. Face plate is 1.75″ wide for easy reading. This thermometer reads in both Fahrenheit and Celsius. It also features a turn off point indicator at 140 degrees to help you keep the milk from overheating. Red and green zones visually signify perfectly steamed milk and warn when the milk is overheating. Hot and cold calibration points are on this thermometer and it comes with calibration instructions (calibration tool sold separately).

    Comes with an NSF thermometer clip used to attach to steaming pitcher.

    NSF Approved Product

     

    5 inch stem thermometer for use with most smaller pitchers (under 32 ounces in size)

    Stem length:  5 inches (12.7 cm)

    Face diameter:  1.75 inches (4.4 cm)

    Temperature range:  0 – 220 Fahrenheit (-10 – 100 Celsius)

    Caring for your thermometer:  Clean daily with warm soapy water.  Do not submerge fully or soak in water. Calibrate your thermometer weekly (calibration tool sold separately).

    RM90.00
    Select options This product has multiple variants. The options may be chosen on the product page

  • RATTLEWARE TAMPER, SMALL ROUND HANDLE, 53mm

    (Tamper)

    Our Rattleware Tamper features a highly durable, impact resistant ABS handle. The round handle is perfect for a smaller hand. Tamper fits a 53mm portafilter.

    • Diameter of handle at widest point: 2.0″
    • Handle height (from top of base): 2.0″
    • Overall height (bottom to top): 3.25″
    • Stainless Steel base with ABS plastic handle
    RM350.00
    Select options This product has multiple variants. The options may be chosen on the product page

  • GRADUATED MIXING GLASS 16 oz

    (Graduated Mixing Glass)

    This sturdy tumbler serves double duty; use it to mix or measure.

    • The graduation marks read in both ounces and milliliters.
    • Height: 5.75in. / 15cm
    • Mouth: 3.25in. / 8cm
    • Bottom: 2.25in. / 6cm
    RM80.00
    Select options This product has multiple variants. The options may be chosen on the product page

  • RATTLEWARE CLIP, THERMOMETER TRIANGLE

    (Thermometer Clip)

    The shorter length of this clip makes it ideal for use with steaming pitchers of all sizes.

    RM27.00
    Select options This product has multiple variants. The options may be chosen on the product page

  • RATTLEWARE STEAMING PITCHER SPOUED BELL

    (Steaming Pitcher Spouted Bell)

    Spouted Bell Pitcher features a design that combines the classic bell pitcher shape, which produces velvety foam by folding air into the milk, with a latte art spout. This traditionally shaped steaming pitcher with handle is constructed from durable stainless steel and is ideal for creating latte art designs such as the rosetta. Experienced baristas know that latte art depends on consistently steamed or frothed milk. The 36-ounce pitcher features the bell-shaped design that has become the industry standard and is large enough to allow baristas to steam milk for multiple beverages at once.

    Price range: RM180.00 through RM210.00
    Select options This product has multiple variants. The options may be chosen on the product page

  • SPOON, FOAM 8.25″

    (Spoon Foam)

    This large spoon is great for holding back and scooping foam for your favorite drinks.

    • Total Length:8.25in.
    • Bowl Width: 2.25in.
    • Stainless steel
    RM90.00
    Select options This product has multiple variants. The options may be chosen on the product page

  • KNIFE, FOAM

    (Knife Foam)

    The curved blade is fabulous for holding back foam. And yes, you can use it for cream cheeses.

    • Total Length: 8.75in / 22.2cm
    • Handle Length: 4.25in / 10.8cm
    • Blade Length: 4.5in / 11.4cm
    • Blade Width: 1.25in / 3.2cm
    • Stainless steel blade, white plastic handle.
    RM80.00
    Select options This product has multiple variants. The options may be chosen on the product page